Oxygen Hose Clamp pliers
- Active Member
- Posts: 147
- Joined: 17 Jun 2005, 05:09
Anyone have the NSN/Part # for the oxygen regulator hose clamp pliers? I used to have the numbers in my little green book and I'd like to get a pair or two for our oxygen boxes. Thanks in advance!!!
- Active Member
- Posts: 147
- Joined: 17 Jun 2005, 05:09
Thanks for the reply! I'll run that through FEDLOG at work and talk to our support section about obtaining a pair of those pliers. Thanks again!!!
- Enthusiast
- Posts: 36
- Joined: 22 May 2007, 19:11
- Location: Sheppard
Eggroll,
If that PN doesn't cross to anything, check out the applicable JG and or GS/FI. It will have the PN in there for those pliers...I know I had to order them @ Luke in order to prevent a QA qrite-up while R2g a filter assy.
Racker
If that PN doesn't cross to anything, check out the applicable JG and or GS/FI. It will have the PN in there for those pliers...I know I had to order them @ Luke in order to prevent a QA qrite-up while R2g a filter assy.
Racker
Luke
Osan
Mnt Home
Sheppard
Osan
Mnt Home
Sheppard
- Newbie
- Posts: 1
- Joined: 05 Aug 2008, 22:58
Aviall carries the 450-813 Avox o2 hose pliers in stock . www.aviall.com or 1800aviall1..
- Newbie
- Posts: 13
- Joined: 28 Feb 2008, 11:52
You might try a company called GENTEX. I recently ordered these pliers through them, They bought out AVOX I believe. They show the pliers as a part a "Grab n Go Oxygen Mask Tool Kit", but they will sell them separately for about $150 each. I assume you are talking about the sawtooth clamps.
10 posts
|Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests