Fairbanks is located at approx 64.837780° N 147.71639° W while Bodø MAS is located at approx 67°18′N 14°32′E

As a retired F-16 mechanic for 20 yrs I can attest to the fact that it is very easy for the jet to slide on the ice,snow or hyd fluid during "normal" 10 minutes engine runs for the hot oil servicing run. I did lots of them while assigned to Eielson in the hangars, open flight line and hush house too. I am sure the individual running this aircraft did nothing wrong while running this aircraft. I comment him/her for their excellent emergency procedures and save a muli-million dollar aircraft from more damage than was done. Keep up the great work because unless you have been there you don't know how rough it can be working in that enviroment day in and day out.

That's a brilliant idea Jett, but those of us who worked on the flight line at EAFB (farthest north f-ing fighter squadron) know that you use rope chocks, because they don't slip on ice there. And they are REALLY fun to cut. Great idea with the hook though, but in the "real" flight line world tiedowns do not exist at every ramp spot. Except out at loop Salcha in the 18th's case.....

Ok, the Mech did follow the T. O, But common since would also tell you that don't do 80% run ups on the snow or Ice. I bet it didn't jump the chock but pushed it out of the way and only one. I think that we should all go ahead and chain or hook if on snow or ice.

The hook only has to be engaged during Mil. or Burner run's. You can run up to 80% in the chocks. Matt if you have access to a T.O feel free to pick it and read! The crew chief did NOTHING wrong!!

Crew chief DID do something wrong. Where is the hook? Doesnt that have to be engaged when doing engine runs above idle????

I was there when it happed. Eielson AFB, AK. We were doing a hot oil servicing run, the jet had just come out of phase. The run was conducted on hard packed snow. The jet was being run at 80% when it jumped chocks and slid sideways, hit the asphalt and nosed over. The CREWCHIEF did nothing wrong. Also the size chock specified in the AFI WAS being used. Questions? Send me an e-mail