- Posts: 7
- Joined: 04 Sep 2011, 06:59
- Location: Shaw AFB
lewandom wrote:I want to make an operational C-D nozzle dose anybody have some good pictures or a breakdown of how the nozzle works and how the pedels accuate? thanks
lewandom wrote:wow is that a pic of an F-15 (an E model based on the way the AIM-120's are hanging off of it and the pod up front) W/ GE engines....never knew they made any W/ GE's...
The nozzel on the K-80F's I plan on using are around 3" in diameter, and the engine tube between the engine and the rear if the jet is 4.75" in diameter so i don't think it necking down will make too much of a diffrance...I have another crazy Idea in my head....just an Idea...not nesseserely going to use it...but mabe an afterburner, there's prob. a good 6-8 inches between the end of the engines and the nozzle, plenty of room for one, I know it's aganst AMA rules, so I'll have to disable it at AMA fields, but if I ever get back to the southwest it would tear up a dry lakebed or two, I appcerate all the help, dose anyone have any tech drawings, IPB's, TO's ect. that illistrate how it all fits togeather?, only post it if its not controled doc. though. Thanks
Users browsing this forum: No registered users and 0 guests