F117 A
For my sim I want to have the surfaces deployment angles if someone else here know it
- Elite 5K
- Posts: 5999
- Joined: 10 Mar 2006, 01:24
- Location: Nashua NH USA
You probably won't be able to get that information. MD is teh only one here that I know of who operated the F-117 and I haven't seen a post from him in a long time.
"Spurts"
-Pilot
-Aerospace Engineer
-Army Medic
-FMS Systems Engineer
-PFD Systems Engineer
-PATRIOT Systems Engineer
-Pilot
-Aerospace Engineer
-Army Medic
-FMS Systems Engineer
-PFD Systems Engineer
-PATRIOT Systems Engineer
Ok ,but it has :2 elevator's ,2 flaperons , 2 rudders but no airbreak' s .I have a question : flaperons have to work in conjunction with the elevator's at take off to create the lift or against them to pushing down the tips of the wing .This means inside flaps is down and outside is up ,in my understanding .Also canted rudders if toe-in helps.
- Elite 5K
- Posts: 5999
- Joined: 10 Mar 2006, 01:24
- Location: Nashua NH USA
"The elevons do not act as flaps to reduce the rate of descent for touchdown, so the landing speed of the F-117A is high, at about 180mph to 190mph,"
https://www.airforce-technology.com/projects/f117/
Also, the rudders are ruddevators.
https://263i3m2dw9nnf6zqv39ktpr1-wpengi ... k-tech.jpg
https://www.airforce-technology.com/projects/f117/
Also, the rudders are ruddevators.
https://263i3m2dw9nnf6zqv39ktpr1-wpengi ... k-tech.jpg
"Spurts"
-Pilot
-Aerospace Engineer
-Army Medic
-FMS Systems Engineer
-PFD Systems Engineer
-PATRIOT Systems Engineer
-Pilot
-Aerospace Engineer
-Army Medic
-FMS Systems Engineer
-PFD Systems Engineer
-PATRIOT Systems Engineer
Thanks for your time . Appreciate your reply.
7 posts
|Page 1 of 1
Who is online
Users browsing this forum: No registered users and 8 guests