F-16 Instructor/Aircraft Mechanic III-Ft. Worth, TX
- Newbie
- Posts: 3
- Joined: 23 Oct 2017, 17:13
- Location: TX & FL
At Lockheed Martin Rotary and Mission Systems (RMS), we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a Lockheed Martin employee. Lockheed Martin values your skills, training and education. Come and experience your future!
Flight Controls. Provide formal instruction and assistance with the installation, troubleshooting, repair and maintenance of F-16 primary/secondary flight controls systems including instruments, Analog/Digital System Interface, fuel indicating, data recording and air data systems at the organizational level of maintenance. Inspects, analyzes and evaluates subsystems such as flaperon, rudder, stall warning, horizontal stabilizer, miscellaneous, speed brakes, leading edge flaps, and seat data recorder, air data, flight instruments, data acquisition and fuel indicating to determine operational status. Advice and assistance will be provided at the Intermediate level on those components not supported with automatic test equipment.
The instructor shall possess at a minimum the equivalent of a USAF skill level of seven (7) with military experience clearing aircraft for flight equipment discrepancies and 4 years current experience in their respective disciplines on F-16s.
Must have strong communications and interpersonal skills and be able to read, write and speak English fluently. Experience with Microsoft Office Suite (MS Word, Excel, PowerPoint) is mandatory.
All personnel must have a secret clearance or the ability to obtain a secret clearance prior to employment. All necessary instructor, technical and skills certifications must be obtained prior to employment.
Rate: $31.89/hr
Location: Fort Worth Technology Center, 7000 Calmont Ave, Fort Worth, TX 76116
How to apply: (1) Go to http://www.lockheedmartinjobs.com, create a profile if you’ve never applied to a Lockheed Martin job in the past. (2) Apply to job req 399544BR (we have 3 positions) and upload your resume.
Flight Controls. Provide formal instruction and assistance with the installation, troubleshooting, repair and maintenance of F-16 primary/secondary flight controls systems including instruments, Analog/Digital System Interface, fuel indicating, data recording and air data systems at the organizational level of maintenance. Inspects, analyzes and evaluates subsystems such as flaperon, rudder, stall warning, horizontal stabilizer, miscellaneous, speed brakes, leading edge flaps, and seat data recorder, air data, flight instruments, data acquisition and fuel indicating to determine operational status. Advice and assistance will be provided at the Intermediate level on those components not supported with automatic test equipment.
The instructor shall possess at a minimum the equivalent of a USAF skill level of seven (7) with military experience clearing aircraft for flight equipment discrepancies and 4 years current experience in their respective disciplines on F-16s.
Must have strong communications and interpersonal skills and be able to read, write and speak English fluently. Experience with Microsoft Office Suite (MS Word, Excel, PowerPoint) is mandatory.
All personnel must have a secret clearance or the ability to obtain a secret clearance prior to employment. All necessary instructor, technical and skills certifications must be obtained prior to employment.
Rate: $31.89/hr
Location: Fort Worth Technology Center, 7000 Calmont Ave, Fort Worth, TX 76116
How to apply: (1) Go to http://www.lockheedmartinjobs.com, create a profile if you’ve never applied to a Lockheed Martin job in the past. (2) Apply to job req 399544BR (we have 3 positions) and upload your resume.
1 post
|Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests