Pilot comm cord
- Newbie
- Posts: 10
- Joined: 10 Jan 2015, 15:43
What’s up everyone! I need a bit of help. I’m trying to get a good part number for a pilot comm cord on a C model acft. The IPB shows some info but when I go to Fedlog the discriptions don’t match what I’m looking for if it has any description at all. The jets we have here don’t have any number printed on the pre-existing cables and our backshops doesn’t have the shielded type of cable, only the non shielded. Any help would be very much appreciated. Thanks much
- Enthusiast
- Posts: 58
- Joined: 26 Nov 2014, 09:45
Take a look at this website...
https://store.acousticom.com/cx-4707caic-m2244233-4707
And I believe the PN for just the Comm Cord Cable (no connectors) is...
Part Number EPD-RWC-21870
https://store.acousticom.com/cx-4707caic-m2244233-4707
And I believe the PN for just the Comm Cord Cable (no connectors) is...
Part Number EPD-RWC-21870
- Enthusiast
- Posts: 58
- Joined: 26 Nov 2014, 09:45
mc5wes wrote:If you go to the wiring tech data.You can get the wire type code for the ICS cable. With the code you can get the Part Number from the Tech Data.
You are correct but, it just so happens that the WDs are a little behind the times and that Wire Type Code NA, which is tied to Cable LM Spec C10575-1, is inactive for procurement and has since been replaced with LM Spec C10575-2. C10575-2 relates to Vendor PN EPD-RWC-21870
- Newbie
- Posts: 1
- Joined: 03 Jul 2023, 19:10
yooper65 wrote:Take a look at this website...
https://store.acousticom.com/cx-4707caic-m2244233-4707
And I believe the PN for just the Comm Cord Cable (no connectors) is...
Part Number EPD-RWC-21870
The NATO data file for the EPD-RWC-21870 cable is located here NSN 6145-01-593-5976
6 posts
|Page 1 of 1
Who is online
Users browsing this forum: No registered users and 13 guests